Three reasons why some manufacturers choose clear product packaging.

Every maker of retail products understands that there’s not a one-size-fits-all when it comes to product packaging. The type of product and the brand voice dictate what the final packaging should look like, and that packaging should be almost as varied as the products themselves. These retail businesses have studied consumer behavior for decades in an effort to maximize the effectiveness of different types of packaging. They understand what types of packages are most effective, which have the greatest return on investment, and which packages work for specific products.

One of the most common types of packaging is clear product packaging. This type of packaging is almost always made of a clear plastic that allows the potential buyer to see the product itself. It’s probably the type of packaging that you’ve seen most often when you’re in a retail store, and there are a few reasons for that. Here are the three main reasons why some manufacturers choose clear product packaging.

http://www.dunwiddie.com1. It’s Affordable. One of the primary reasons why so many manufacturers choose clear product packaging is because it’s incredibly affordable. Plastic is rather inexpensive to obtain, and since this type of packaging doesn’t use very much of it, it’s one of the most affordable types of packaging out there. When you’re a producer of retail products and you know that if you can cut costs marginally you’ll boost sales and drive your revenue in the right direction, you make that choice. Thus, clear product packaging is popular partly because it’s affordable.

2. It’s the Best Choice for Certain Products. It’s not all about cost, however. For some products, clear product packaging is truly the most effective form of packaging there is. For certain products, consumers like to be able to see the product itself to make sure that it’s going to work the way they want it to work. If they’re buying a phone charger for example, they want to see the adapter on the end of it so that they’re sure it’s going to work with their phone. For this product, and many others, clear product packaging is the best choice because that’s what consumers want.

3. It’s Light to Ship. The final reason clear product packaging is so popular has to do with cost again, but it’s about how expensive it is to ship. When you’re shipping thousands of products at a time, using a packaging like clear product packaging that’s quite light can save a company huge sums of money on delivery. The lighter the products are, the less they cost to ship.

If your business ends up deciding that clear product packaging is the best option for your retail products, make sure you have a great company like Dunwiddie Custom Packaging manufacture them for you. They’ve been working in the retail product packaging industry for a long time, and they know what it takes to produce high-quality and affordable clear product packaging. To learn more about their company or to see some of the products they’ve created packaging for in the past, visit their website at

Posted by in A118


Concentrate vaporizers work great.

http://www.quantvapor.comThe laws surrounding various concentrates made from dry herbs have been changing rapidly across the country, and that’s resulted in an entirely new industry springing up. There are now hundreds of companies in the US that produce various concentrates for human consumption. Then there are hundreds of other companies that sell those concentrates. And then there are other companies springing up that are producing products to help consumers consume those concentrates. It’s a booming industry, one that’s providing huge sums of tax revenue to the states where it’s legal.

The concentrate industry is here to stay. Many people prefer concentrates to other types of dry herb products because they don’t have to consume nearly as much to get the same desired effect. Of course, since more and more people are wanting to consume dry herb concentrates, it shouldn’t be surprising that more and more companies are producing products to make it possible. One of the many products that are coming out to help consumers indulge in concentrates are concentrate vaporizers. A concentrate vaporizer is a handy little product that allows people to vaporize the concentrate. That vapor can then be inhaled into the body.

There are lots of great things about concentrate vaporizers. For one thing, they’re really convenient and discreet. Some of them are quite small, so you can carry them around in your pocket. When you’re ready to consume some concentrate, you just pull them out of your pocket, pull on the one end, breathe in, and then put them back into your pocket. Many of them are designed to be discreet, so most people won’t even know what you’re doing. They’re also incredibly quick to use, so it’s quite likely that no one will even notice. On top of being discreet and convenient, they’re also incredibly tidy. Rather than having to pull the sticky concentrate out and get it all over your hands, you simply load a little bit into your vaporizer and then let it sit there. You consume it until it’s all gone, throw it away, and you’re done. You don’t have to worry about having any dry herb out or spilling it on your carpet. Another great thing about concentrate vaporizers is that the vapor is much cleaner and easier to consume than traditional forms of smoking. It won’t burn your throat like smoking does, and there is a lower chance of developing some kind of health issue from use.

If you like to consume concentrates but you’re tired of doing it in the traditional way, you should strongly consider investing in a oil concentrate vaporizer. These handy little devices are incredibly easy to use, and they make it convenient to bring your oil concentrate with you wherever you go. Companies like Quant have worked tirelessly to produce vaporizers that easily fit into your pocket and that look great. Their vaporizer is also affordable. If you want to learn more about their products and see if they’re right for you, visit their website today.

Posted by in A118


Water slide restoration is something waterparks should consider at the end of each summer. summer is almost here, which means it’s almost time to start hitting up your local waterpark. Given that summers seem to be getting hotter than ever, it’s even more public desire to spend time at waterparks. Demand is on the rise, which is good news for waterparks, but it also means more work. For members of the public, waterparks are places they go when they want to get away from their regular lives and have a good time with their kids. For the people who work at waterparks, they’re fun jobs to have, but they’re also a lot of work.

The primary concern for waterpark employees is that all of the rides and slides are completely safe for people to go down. This is why employees generally test out the rides before the doors open and members of the public start rushing toward them. These employees have to make sure that all of the slides are ready to go and there’s nothing obtruding from them, that the water is flowing at the proper rate, that the water is the right temperature, and that all of the tubes are inflated to the right levels. Ultimately, they just need to make sure that every piece of equipment is working properly before people start using them. Sometimes a slide will be damaged in some way, and the employees will have to contact a water slide repair company and have them come out and resolve the issue.

Of course, the vast majority of work that’s done to water parks is performed in the offseason. That’s when waterparks will have a company come out and perform a water park restoration for all of the slides and rides in the park. They’ll go over the entire slide, from every square inch of plastic to every single bolt holding the slide together. They’ll make sure that every bolt is tight, that all of the plastic is good to go, and they’ll even check to see if the slide needs another coat of gel over it. They’ll also look at other rides that don’t incorporate a slide to make sure that each piece of equipment is working properly and doesn’t pose a safety risk to anyone who were to ride on it. Essentially, they just look over square inch of the waterpark to ensure that everything is good to go before the next season starts.

Most waterparks, rather than doing this right after the summer begins, will instead contact a water park restoration company to come out after the winter. The winter can take a toll on rides with the cold temperatures, snow, and even ice that accumulates on them. Thus, most waterparks will have a company come out right before the summer begins to make sure that there isn’t anything wrong with any of the equipment. They’ll contact a company like Slide Rite, have them look over every aspect of their park, and then pay for any repairs or maintenance that needs to be performed. It’s absolutely critical that every waterpark does this.

Posted by in A118


A seamless gutter machine makes installing gutters easier than ever.

There are lots of jobs out there that look easy to the uninitiated, but once you actually try to do them yourself, they don’t go quite as smoothly as you imagined. One such job is laying hardwood flooring. If you watched an experienced worker lay hardwood flooring, you’d think the job was relatively painless. But once you tried it yourself, you’d realize there’s a lot more to it. There’s a great deal more sawing and measuring than most people realize, and the smallest mistakes can create huge problems. Sewing is another job that’s a lot harder than people who’ve never done it realize. If you watch someone sewing or knitting something, you’d think it was pretty easy, but it actually takes a lot of hard work and practice to get good at it.

Another job that most people would think was relatively straightforward but that’s actually quite difficult is hanging up gutters. Most people look at gutters and assume that they’re pretty easy to hang. After all, it’s just a piece of metal that gets nailed to the side of a house. While this is basically true, the actual process is much more difficult than most people realize. Part of the problem is that gutters don’t come in the sizes that you need them. You might have an eight-foot piece of gutter, but you’re trying to hang gutter on a 20-foot side of a house. That means you have to use two eight-foot pieces and then cut a third one in half, and then you have to attach them together perfectly so that when water starts running off your roof it doesn’t leak through the gutter. On top of that, you’re having to stand on a ladder to do all of the work, something that’s a lot more difficult and tedious than most would think. The point here is simple: hanging up gutters is relatively difficult work.

It’s this fact that’s behind why companies invented the seamless gutter machine. A seamless gutter machine is a contraption that allows people to create a gutter of any length. If you want a 26-foot gutter to run alongside your house, you simply load 26 feet worth of raw material into the gutter machine in the form of a coil, usually made of aluminum, and turn the gutter machine on. It will form that coil of aluminum into a seamless gutter, and then you take that one piece of gutter, get up on your ladder, and nail it to the side of your house. Yes, you still have to get up on a ladder and nail it on, but at least you don’t have to combine multiple pieces of gutter to get full coverage along your house.

The gutter machine is an incredible invention that makes the difficult work of hanging gutters a great deal easier. To learn more about these machines and to buy one for yourself, check out the website for New Tech Machinery. There you’ll find copious amounts of information about gutter machines.

Posted by in A118


Only shop for window blinds at stores with these three things. with most types of shopping, trying to buy window blinds can sometimes become more of a headache than it’s worth. Sure, you want to replace the old window blinds in the bedrooms of your home because they’re driving you crazy, but what’s really driving you crazy right now is that you can’t find a quality store to buy the new ones from. You’ve driven all over your city trying to find the perfect window blinds, which has meant struggling with traffic, trying to find a parking place, and getting lost along the way, only to discover that the store you just walked into doesn’t have any of the window blinds that you’ve been looking for. If this hypothetical sounds anything like your experience trying to buy new window blinds, then no one could blame you for throwing in the towel. It can be a stressful experience that often isn’t worth the hassle.

The key to making the experience much more enjoyable is figuring out the right store to buy your new window blinds from. Fortunately, you can do this from the comfort of your own home without having to get up from your computer. All you have to do is know what you should be looking for, and once you find that perfect store you simply drive over to them, pick out the window blinds you want, and go on your merry way. There are three things that you should look for in a window blinds store. Fortunately, like was mentioned already, you can find a store with these three things without getting up from your computer. Here they are in no particular order.

1. Affordable Products. First and foremost, you want to find a store with affordable products. If it’s going to cost you thousands of dollars to replace your old window blinds, you might end up deciding that you don’t really want to replace them all that bad. To figure out if a store has good prices for their products, simply visit their website, find the prices on their products, and then compare those prices against their competitors. If they don’t have their prices listed on their website, find reviews about them and see if price is mentioned in those reviews.

2. Great Customer Service. It’s also critical to find a custom blinds store with great customer service. You might be thinking that it’s impossible to know about their customer service without visiting them in person, but that’s not entirely true. Just read through their reviews to see what people are saying. You can generally get a pretty good idea of what their customer service is like.

3. Convenient Location. Finally, try and find a window blinds dealer with a convenient location. It’s always nice when you don’t have to travel too far or mess with too much traffic to visit their store.

There are lots of window treatment dealers out there that offer these three things, but House of Blinds is definitely one of the best. There’s a reason why they’re the premier window blind dealer in their region.

Posted by in A118